Dock Revive - Full Kit Coverage: Expect approximately 200 square feet of coverage with two coats applied depending on porosity and condition of the surface.

Dock Revive is a durable, environmentally friendly coating specifically formulated for resurfacing wood docks, ramps, steps, boardwalks and more. Color choice is unlimited, just add one gallon of ANY solid color gloss acrylic latex stain to the kit.

  • fills cracks
  • locks down splinters
  • seals hardware
  • slip-resistant
  • high build and quick-setting
  • applies with standard paint equipment
  • VOC-free and environmentally friendly

The Dock Revive kit includes one gallon of our special bonding agent for priming; plus one gallon of of our penetrating polymer resin and four bags of our specially formulated dry chemistry, to which you add one gallon of any solid color acrylic latex stain.

Are you tired of maintaining or replacing wood docks? If your dock is structurally sound, you can avoid repetitive maintenance and costly replacement by choosing to resurface with Dock Revive.

This durable, eco-friendly polymer coating fills cracks, locks down splinters and seals hardware, at a fraction of the cost of other options in terms of time, labor and money.

A VOC-free, water-based coating, Dock Revive creates a highly textured, slip, stain, scuff and fire-resistant surface. Plus, your color choice is unlimited – just add one gallon of ANY solid color acrylic stain to the kit.

Each kit includes one gallon of special dock PermaBond, one gallon of our penetrating polymer resin and four bags of a specially formulated dry chemistry for dock applications. Dock Revive applies with ordinary paint tools and is high build and quick setting, for minimal time-out-of-service. You can roll out a brand new dock surface in the morning that can handle light foot traffic within a few hours.

Formulated to outlast any other sealer, stain or coating on the market, Dock Revive can resurface, preserve and extend the life of wood docks, boardwalks, ramps, gangways, steps and more.

All of our innovative coatings are environmentally responsible choices. Not only are they non-toxic, but they keep old dock and deck boards and even concrete, out of our landfills — while extending the service life of existing structures for years.

Make the choice to resurface with Dock Revive, so that you spend less time maintaining and more time enjoying your outdoor living and recreating spaces.

Why can't I use Dock Revive on a older pressure treated Deck. ( Joe, 13/07/2016 )
Different formulas. The Dock revive has made for a wetter climate.
Should I use Deck Revive or Dock Revive for a pressure treated deck, directly around an in ground Pool? ( Jeff, 06/07/2016 )
Use Deck Revive.
Hello, I'm trying to figure out how much of your product I will need. I have 600 sq ft of deck that needs to be finished. Am I better off using the Dock revive product over the Deck revive? Next, do the kits come with the Perma Caulk? Lastly, does the Perma Caulk go on before or after the Perma Bond? Thanks, Andrew ( Andrew White, 04/07/2016 )
Use the Deck Revive. You would need 3 Full Kits. The PermaBond and Permafill are sold separately. The PermaBond goes on before the Premafill.
I bought your dock revive kit. I also bought your perma bond. Do I need the perma bond and will help since I have already purchased it?

Thank you in advance.

Charles Hamilton
( Charles Hamilton, 12/05/2016 )
The Dock Revive Kit comes with 1 Gallon of the PermaBond. It is needed to ensure a proper bond.

Ask a question

Note: HTML is not translated!

Write a review

Note: HTML is not translated!
    Bad           Good

Dock Revive Kit

  • Product Code: Dock Revive Kit
  • Availability: In Stock
  • $315.00

Related Products

Perma Fill (Perma Caulk)

Perma Fill (Perma Caulk)

COVERAGE:  One Perma Fill should treat average size deck of approximately 180 sq ft, depending ..


Dock Revive - 1/4 Kit

Dock Revive - 1/4 Kit

Dock Revive - 1/4 Kit Coverage:  Expect approximately 50 square feet of coverage with two ..


Tags: Dock Revive Kit